The description of SBH15-M amorphous alloy oil-immersed transformer
SBH15-M amorphous alloy oil-immersed transformer can be used in high-rise buildings, commercial centers, subways, airports, stations, industrial and mining enterprises and power plants, especially suitable for places that are flammable, explosive and require high fire resistance. Therefore, SBH15-M amorphous alloy oil-immersed transformer are ideal energy-saving power distribution equipment in indoor power supply networks.
SBH15-M amorphous alloy oil-immersed transformer produced by ZTELEC uses amorphous alloy materials instead of silicon steel sheets to make transformers. Compared with S11 series transformers, the no-load loss is reduced by 60 to 70% and the load loss is reduced by 5 to 15%, which has obvious energy saving and environmental protection benefits. SBH15-M amorphous alloy oil-immersed transformer are materials such as iron, boron, silicon, nickel, cobalt, and carbon which are melted, and a rapid and rapid solidification process is adopted to form the molten steel to the metal sheet at one time. Its magnetizing power is small which can greatly reduce no-load loss and no-load current. The low-voltage coil adopts a foil structure to enhance the product’s short-circuit resistance. SBH15-M amorphous alloy oil-immersed transformer uses Dyn11 connection to reduce the impact of high-order harmonics on the power grid and improve the power supply quality; the iron core and the coil adopt special clamping methods, and special linings are added to important parts Pad to reduce the effect of mechanical stress on the core loss while reducing noise. SBH15-M amorphous alloy oil-immersed transformer is to use amorphous alloy material instead of silicon steel sheet to manufacture transformer. Compared with S11 series transformers, the no-load loss is reduced by 60 to 70% and the load loss is reduced by 5 to 15% which has obvious energy saving and environmental protection benefits. Amorphous alloys are materials such as iron, boron, silicon, nickel, cobalt, and carbon which are melted and a rapid and rapid solidification process is adopted to form the molten steel to the metal sheet at one time. Its magnetizing power is small, which can greatly reduce no-load loss and no-load current. The low-voltage coil adopts a foil structure to enhance the product’s short-circuit resistance; it uses Dyn11 connection to reduce the impact of high-order harmonics on the power grid and improve the power supply quality. The iron core of SBH15-M amorphous alloy oil-immersed transformer and the coil adopt special clamping methods and special linings are added to important parts to reduce the effect of mechanical stress on the core loss while reducing noise.
The features of SBH15-M amorphous alloy oil-immersed transformer
1. The iron core of SBH15-M amorphous alloy oil-immersed transformer is supported by an amorphous alloy of magnetically conductive material, with superior performance. SBH15-M amorphous alloy oil-immersed transformer characteristics: no-load loss is one-third of ordinary silicon steel sheet dry transformation, significant energy saving effect, the product meets energy efficiency standards.
2.SBH15-M amorphous alloy oil-immersed transformer is safe, flame-retardant and fire-proof that can be installed directly in the load center.
3.SBH15-M amorphous alloy oil-immersed transformer is maintenance-free, easy installation, and low comprehensive operating cost.
4. It has good moisture-proof performance and can be operated normally under 100% humidity. SBH15-M amorphous alloy oil-immersed transformer can be put into operation without drying after shutdown.
5. Low consumption, low noise and strong heat dissipation ability.
6.SBH15-M amorphous alloy oil-immersed transformer can be configured according to customer needs, safe and beautiful.