How to Set Temperature Controller? (2)

5, differential time setting: press SET key to select “D”, the green display shows the value of this parameter, select shift, increment, decrement key to set or modify this parameter. The longer the derivative time of the instrument is set, the stronger the correction by differential action.

6, proportional cycle setting: press SET key to select “T”, the green display shows the value of this parameter, select shift, increment, decrement key to set or modify this parameter.

7, auto tuning setting: press SET key to select “Aτ”, the green display shows the value of this parameter, select shift, increment, decrement key to set or modify this parameter; set to “00” means auto tuning turn off, Set to “01” indicates that the auto tuning start.

Amorphous Alloy Dry-Type Transformer

8, lock parameter setting: press SET key to select “LOK”, the green display shows the status of the lock, select shift, increment, decrement key to set or modify this parameter; set to “00” means no lock, set to ” 01 “means that only parameters other than the master control are set. If” 02 “is set, all parameters are locked. Parameter is locked, others can not be modified, to be modified to unlock, which is set to “00”.

9, the host temperature limit setting: Press the SET key to select the display “SOH”, the green display shows the value of the parameter, select the shift, increment, decrement key to set or modify the parameter; This parameter indicates the master relay operating temperature Can not be higher than this value, otherwise, the master set temperature is invalid.